Home Pro Tips for Configuring Your Hyper-V for Advanced Security

Pro Tips for Configuring Your Hyper-V for Advanced Security

Press Release: October 20, 2020

Hypervisors are getting more and more popular among the users worldwide, both individuals and businesses, as they enable access to more powerful technology with limited software and hardware capacities at hand. The Hyper-V solution from Microsoft is one of the most common virtualization options currently used, as it comes embedded into the Microsoft OS package and can be utilized without extra purchases, licenses, or arrangements.

But along with the ease of its use and numerous appealing features, users still report that some degree of technical knowledge is needed for setting the virtual instance on a computer. This guide clarifies the best practices of Hyper-V configuration, issues that users may come across when using nakivo hyper-v backup, and ways of minimizing the dangers of virtual data loss with embedded data protection and Nakivo hyper-v backup .

Verify Your System’s Compatibility with Hyper-V

The starting point of work on Hyper-V configuration is to check out whether your computer can generally support it. The fact that Hyper-V comes embedded into your software package does not mean by default that it will run smoothly. Overall, there are not too many critical requirements for Hyper-V activation, but some of them are vital:

• The version of Windows you have (Hyper-V is currently supported on Windows 10, Pro, and Education versions)

• Processor type (Hyper-V runs only on 64-bit processors with SLAT)

• Your CPU should support the VT-c extension

• Memory (minimum 4GB of spare memory is required)

Explore Various Hyper-V Enabling Options

To date, users can enable Hyper-V in a variety of ways, so the choice depends on your software knowledge and the availability of these options. First, Hyper-V may be run with PowerShell. To do it, you only need to open the PowerShell console in the Administrator mode and run a select command for Hyper-V activation. Once the installation process ends, all you need to do is reboot your machine, starting to use Hyper-V afterward.

CMD and the Deployment Image Servicing and Management (DISM) feature of Windows can also be used to run Hyper-V. The process is the same as with PowerShell (the CMD session should also start in the Administrator mode), but the command will be different.

Finally, users can quickly get one step closer to Hyper-V from the Settings section, by going to the “Apps and Features” folder and pressing “Programs and Features,” then ‘Turn Windows Features on or off,” and then selecting Hyper-V and clocking “OK.” Once this is done, Hyper-V gets automatically activated on your machine.

Beware Technical Issues

Things happen, and even those who have installed Hyper-V correctly may come across some technical bottlenecks. The most common problems emerging during Hyper-V use include:

• Troubles with the processor (lags of the host machine’s CPU or overloading of processors);

• Memory issues (overcommitment of memory to some non-critical tasks; RAM depletion; failures during the launch of VMs);

• Network problems (imbalance of network resource distribution; network-bound host issues);

• Storage problems (waste of physical storage, slow I/O; disk latency).

As all the troubles mentioned above come from hardware, they should be monitored closely when setting up and running your VMs in Hyper-V. Otherwise, if hardware problems go undetected and persist, you risk losing data because of a massive hardware collapse.

Never Forget to Back-Up Data

Once your Hyper-V is set up and running, take proper care of the data backup measures. It’s good to have some external data backup software or at least to use the Hyper-V Failover Clustering method for creating reserve copies of your data on other hosts. In case your data is not backed up properly, and something goes wrong with your VM, the data loss may be permanent.

More Pro Tips for Expert Hyper-V Users

For those who want more guidance on increasing their VM capacity and running Hyper-V as pros, we have prepared a couple more tips:

• Check the sufficiency of physical network adapters in the host machine to prevent overloading

• Enhance your dynamic disk performance with Hyper-V R2

• Use your VMs to access iSCSI storage

• Make sure of the processor compatibility features

• Make use of the live migration feature for easy and convenient movement of VMs across hosts.

As you can see, nothing is challenging about Hyper-V activation. Take your final step to enjoying the world of virtualization services. Set up Hyper-V, take all data protection precautions, and enjoy the unlimited virtual capacity. Click here 

Notes to editors

For more information, please contact:


Tel: 4168453381

Email: viktoria.voloshyna@nakivo.com

Visit the newsroom of: vik