Gubbi Enterprises has announced its manufacture and supply of various Machineries for the benefit of Construction Industry.
GE has given details of such machineries as AAC Block Plant, AAC Block Making Plant etc. for Autoclaved Aerated Concrete. These Blocks are made to aerate by creating a reaction between silica in base material such as Fly-ash, Active Lime and Aluminum Powder. The Block’s hardness is achieved by cement strength and instant curing. Gypsum acts as a long term strength gainer. Because of its commitment to quality GUBBI ENTERPRISES name is already known in construction industry as a leading AAC Block Plant Manufacturer in India. These AAC BLOCKS MACHINES manufactured by GE are for the first-choice of construction clients. The Blocks produced by using this AAC BLOCK MAKING MACHINE is superior in quality and hence it is offered for the benefit construction industry.
In addition to the aforesaid machineries, GE also announced offer of CLC BLOCK MACHINE (Cellular Light Weight Concrete) for making Blocks for construction activities. This CLC Block is a version of light weight concrete that is produced like normal concrete under ambient conditions. CLC Blocks are a cement-bonded material made by blending slurry of cement. Stable, pre-formed foam manufactured at site is injected into this slurry to form foam concrete. This CLC BLOCK MACHINE is manufactured by GUBBI ENTERPRISES at its Factory at Wada, Maharashtra.
To meet the growing demand of Fly-ash Bricks in India, GE also state that it has added to its manufacturing programme, Fly-Ash Bricks Fabrication Machine at its most modern Works. It further says that there are two types of machines available, one is Automatic & the other is Manual. The Automatic Machine consists of: Hydraulic Brick Press (70 Ton), Auto Press Feeding System, Press Feeder Bin, Hydraulic Power pack system, PLC based control panel, Heavy duty pan mixer No.2, Belt Conveyor system, Brick Mould standard No.1 (8 cavity), Oil tank capacity 300 ltrs. Require Electrical connection of 21 H.P. III-phase. Production can be 9000/10000 Nos. in 8 hour. As regards the manual: Max. High pressure tonnage: 40, Power connection 16 HP Main Press 7.5 HP, 1 No. Pan Mixer 1 No. 7.5 HP, Conveyor 1 HP) Manufacturing capacity 6 to 8 pcs. In one operation. Tank capacity: 200 ltrs
Apart from the above, GUBBI ENTERPRISES has also announced to Construction Industry that it is also one of the manufacturers and suppliers of PAVER BLOCK PLANT in India. The specification of the machine is Fully Automatic Hydraulic Press for Paver Blocks complete with Electricals & Panel Board. This Machine consists of: 10 H.P.Motor, Both layer auto feed, vibrator to hopper, Auto press & ejection, cycle time 8 to 9 seconds, Hammering while pressing, Oil tank capacity 300 ltrs. Option for using single trolley, Holding while pressing, & Safety sensor guard.
GUBBI ENTERPRISES also informs that it is a supplier of FLY ASH BRICS PROJECT. This Fly Ash BRICK (FAB) is a building material, specifically masonry units, containing class C Fly Ash & water. Compressed at 28 MPa (272 atm) and cured for 24 hours at 66 degree C steam bath, then toughened with an air entertainment agent, the bricks last for more than 100 freeze-thaw cycles. Owing to the high concentration of calcium oxide in class C Fly Ash, the brick is described as “self cementing”. This manufacturing method saves energy, reduces mercury pollution, and costs 20% less than traditional clay brick manufacture.
Company :Gubbi Enterprises
Address :18/26, Dev Prayag CHS Ltd, Bhakti Mandir Road, Nr. Hari Niwas Circle, Thane (W)- 400601 Maharashtra, India
Mobile No. :+919322451475,
Email Id :email@example.com